|
|
||
The Thermo Scientific iPRO 5000 N Total Nitrogen Analyzer provides the most versatile solution for your petrochemical challenges by enabling the direct injection of light and heavy hydrocarbons using a single introduction module.
This breakthrough in versatility now means that the simultaneous analysis of total nitrogen and sulfur in light or heavy hydrocarbons typically takes three minutes per replicate. All of this power is contained within the smallest NS analyzer on the market.
| Specifications | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Instrument Properties | ||||||||||
| Dimensions (D x W x H) | 0.53 x 0.54 x 0.37m | |||||||||
| Weight | 77 lb. (35kg) | |||||||||
| Septum Type | Merlin Microseal* | |||||||||
| Typical Septum Lifetime | 25,000 injections | |||||||||
| Operating Temperature | 15°-35°C (59°-95°F) | |||||||||
| Operating Humidity | 5% @ 15°C - 60% @ 35°C | |||||||||
| Furnace Operating Temperature | 900°-1150°C (1652°-2102°F) | |||||||||
| Injection Module | jetPRO* Direct Injector | |||||||||
| Software | NSX Visual | |||||||||
| Pre-loaded Methods | ASTM and customizable methods |
|||||||||
| Performance | ||||||||||
| Injected volume | 0-250µL | |||||||||
| Sample Injection Speed | 0-2.5µL/sec. | |||||||||
| Typical Sample Analysis time | 3 min. | |||||||||
| Typical Linearity (R2) | 0.995 | |||||||||
| Working Range | 30ppb-10,000ppm | |||||||||
| Typical RSDs | Greater of 40ppb or 2% | |||||||||
| Method Compliance | ASTM D4629, ASTM D6069, ASTM D7184, UOP 936 | |||||||||
| Electrical | ||||||||||
| Voltage | 100 - 240V | |||||||||
| Frequency | 50/60Hz | |||||||||
| Max. Power Consumption | 1500VA | |||||||||
| Gases | ||||||||||
| Primary Oxygen | ||||||||||
| Minimum Oxygen Grade | 2.6 (99.6%) | |||||||||
| Oxygen Consumption | 600-800mL/min. | |||||||||
| Oxygen Input Pressure | 3-7 bar | |||||||||
| Carrier Gas: Choice of Oxygen, Argon or Helium | ||||||||||
| Minimum Oxygen Grade | 2.6 (99.6%) | |||||||||
| Oxygen Consumption | 0-200mL/min. | |||||||||
| Oxygen Input Pressure | 3-7 bar | |||||||||
| Minimum Argon Grade | 4.8 (99.998%) | |||||||||